Historical

The Aerojet Rocketdyne Quality Notes page is kept up-to-date with the most current quality information. If you have a purchase order that pre-dates these notes, please see the following table. For historical quality information specific to location, see below the table.

Historical Quality Terms and Conditions - All Sites

A	Rev. Date	General Requirements	D	Rev. Date	Traceability
A01	11/04/11	General Requirements Redmond	D03	11/06/08	Traceability to Raw Materials
A02	04/12/11	General Requirements Sacramento	D05	11/13/08	Material/Component Traceability
A03	06/23/09	General Requirements Aerojet East	E		Certification
A05	05/23/13	General Requirements All Suppliers	E01	10/29/13	Certificate of Conformance
AR1	04/20/18	Quality Management Systems - Requirements for Aviation, Space and Defense Organizations (AS9100) and General Requirements	E05	11/06/08	Special Process Approval and Certification
AR1	03/11/16	Quality Management Systems - Requirements for Aviation, Space and Defense Organizations (AS9100) and General Requirements	E09	11/06/08	Raw Material Specifications
AR1	09/24/15	Quality Management Systems - Requirements for Aviation, Space and Defense Organizations (AS9100) and General Requirements	E10	11/06/08	Special Process Certification
AR1	09/09/15	Quality Management Systems - Requirements for Aviation, Space and Defense Organizations (AS9100) and General Requirements	E11	11/06/08	Special Process Approvals - Nadcap Only
AR1	12/15/14	Quality Management Systems - Requirements for Aviation, Space and Defense Organizations (AS9100) and General Requirements	E12	01/04/16	Special Process Approval
AR2	09/25/15	Quality Management Systems – Aerospace Requirements for Distributors	F		Inspection
AR2	04/06/15	Quality Management Systems – Aerospace Requirements for Distributors	F03	07/13/12	Source Inspection
AR3	09/25/15	Inspection and Test Quality System (AS9003) and General Requirements	F04	11/05/08	Government Source Inspection
AR3	04/06/15	Inspection and Test Quality System (AS9003) and General Requirements	F06	09/25/15	Sampling Inspection
B		Quality Management Systems	G		Testing
B01	04/07/10	Quality Systems AS9100	G01	10/11/08	Test Coupons - Supplier
B02	04/07/10	Quality Systems ISO9001	G02	10/11/08	Test Coupons - Aerojet
B03	04/08/10	Quality Systems AS9003	I		Electronics
B05	11/05/08	Aerojet Approved Quality System	I17	03/27/13	Recognized Source
B06	11/05/08	Calibration System	M		Master Agreements
B07	12/22/08	Material Integrity System (MIS)	M04	12/23/16	Production Part Approval Process (PPAP)
B08	11/05/08	Distributors	M04	03/16/16	Production Part Approval Process (PPAP)
B10	04/12/11	No Change Policy	M04	02/02/16	Production Part Approval Process (PPAP)
B11	11/05/08	Software Control
C		Process Control
C03	09/25/15	Supplier Special Process Control
C04	09/25/15	Supplier Subtier Special Process Control
C05	10/26/08	Government Qualified Products List
C07	09/25/15	Process Mapping/Manufacturing Planning
C16	11/05/08	Aerojet Furnished Materials/Tooling
C17	11/05/08	Aerojet Approval of Tooling
C18	11/13/08	GIDEP Participation
C21	05/25/11	Single Lot Date Code Required

Camden, AR

For any help needed for Quality Assurance Flowdown requirements please contact your Buyer.

Desoto, CA

Approved Process Sources (Certified Special Process)

Approved Process Sources are accessed through the CITIS gateway in the Supplier Portal tool. Click on the Approved Process Link in the Supplier Portal web page and you will be able to search by supplier or specification.

Contact your buyer for requests to add new suppliers to existing specifications.

If you need assistance with the Approved Process Sources, please contact SQA@Rocket.com.

Approved Source Lists (ASL)

Approved Source Lists (ASL) for RB0 material are available through the Procured Product Acceptance Requirements (PPAR) technical link in the Supplier Portal tool.

If you are not registered for Supplier Portal, complete the Gateway External Access Request Form on the Supplier Forms page for access. If you need assistance, contact the Supplier Portal Administrator D.J. Kindred.

Reference Material

Supplier Material Processing Procedure (SMPP) Development Guide

Supplier Communications

Source Inspection Service is requested through "ASIRS". The Automated Source Inspection Request System (ASIRS) is accessed through the CITIS gateway (Supplier Portal). An emergency Source Inspection hotline is also available for your use at: (818) 586-2790.

Configuration Management Heritage Terms and Conditions

Quality Heritage Terms and Conditions

A		General Requirements
AJR1	04/07/14	Quality Management Systems – Requirements for Aviation, Space and Defense Organizations (AS9100) (AJR1 is replaced by AR1. Refer to the QA Terms and Conditions page.)
AJR2	12/09/13	Quality Management Systems – Requirements for Aviation, Space and Defense Distributors (AS9120) (AJR2 is replaced by AR2. Refer to the QA Terms and Conditions page.)
AJR3	04/07/14	Inspection and Test Quality Systems, Requirements for Aviation, Space, and Defense Organizations (AS9003) (AJR3 is replaced by AR3. Refer to the QA Terms and Conditions page.)
Q		Quality Notes
Q008	12/09/13 01/16/12	Aerospace Supplier Quality Requirements (ASQR-01) Revision 8 (separate link)
Q019	1/09/19	Approved Process Source- Deliverable Documentation
Q019	10/04/16	Approved Process Source- Deliverable Documentation
Q019	11/11/15	Approved Process Source- Deliverable Documentation
Q019	08/01/14	Approved Process Source- Deliverable Documentation
Q019	07/06/11	Approved Process Source- Deliverable Documentation
Q072	03/10/08	AS9102 Aerospace First Article Inspection Requirement and ASQR-01, Revision 6 dated 12-15-2007
Q078	02/04/11	Electronic Quality Documentation Package (E-QDP) Supplier Portal
Q082	10/28/05	Single Lot-Date-Code
Q093	08/26/11 07/06/11	Certification of Compliance Revision 07/06/11 (separate link)
Q100	12/15/14	Aerojet Rocketdyne Source Inspection/Surveillance
Q203	07/12/13	Aerojet Rocketdyne Source Inspection
Q203	10/28/05	Pratt & Whitney Rocketdyne Source Inspection
Q203C	07/16/13	Aerojet Rocketdyne Source Inspection
Q203C	07/26/11	Pratt & Whitney Source Inspection
Q203C	07/06/11	Pratt & Whitney Source Inspection
Q204	08/15/03	Tin Plating
Q205	07/06/11	Evidence of Inspections and Tests Performed By Seller
Q206	09/19/01	Government Source Inspection
Q207	04/27/01	Physical and Chemical Test Reports Identified to Specific Lots
Q219	03/21/17	Material Review (MR) Record(s): Nonconformance Report (NCR) documents
Q219	07/01/13	Material Review (MR) Record(s): Nonconformance Report (NCR) documents
Q223	10/28/05	Nondestructive Test (NDT) Source Inspection
Q230	08/11/05	Government Source Inspection Requirements- Department of Energy (DOE)
Q231	06/27/12	Inspection and Test Records (Record Retention) 15 Years
Q232	09/20/01	Special Procurement Quality Assurance Requirements For Non-SSME Program Hardware
Q240	02/01/10	Material & Processing Specification Revision Flowdown
Q241	02/04/11	ATP Failure Requirement and Manufacturing Process Changes
Q242	02/04/11	Manufacturing Qualification Test (MQT), Manufacturing Process Verifications (MPV)
Q251	10/05/17	Post Award Review – RS25 Program
Q252	10/05/17	Supplier Manufacturing Readiness Review (SMRR) – RS25 Program
Q253	10/05/17	Supplier Manufacturing Readiness Review + Process Control Review – RS25 Program
Q507	04/06/15	Tin Content
Code 82-1	03/81	Configuration Management Requirements for Suppliers

Orange, VA

Contact the buyer identified in the RFQ or purchase order if you require additional information regarding supplier quality assurance requirements.

Redmond, WA

Contact Bill Nash at (425) 882-5771 or Jeanette Finch at (425) 702-6810 (or the buyer if you require additional information regarding supplier quality assurance requirements).

Sacramento, CA